Pemberi Pakan Profil Rendah

Transmin’s Low Profile Feeder (LPF) is the original hybrid feeder delivering the advantages of both belt and apron feeders, plus additional benefits over conventional feeder technology that are unique to Transmin.

LPF memiliki kemampuan unik untuk mengubah arah menggunakan transisi belok. Perubahan arah dari horizontal ke miring dapat dicapai tanpa memerlukan mesin kedua; oleh karena itu menciptakan pemanfaatan ruang yang lebih baik, fleksibilitas tata letak pabrik, menghilangkan titik transisi antar konveyor, dan mengurangi pengeluaran modal. Kapasitas mesin LPF bervariasi menurut aplikasi, meskipun kapasitas 6.000 tph ke atas tersedia dengan mudah. LPF dibangun dengan komponen tepercaya, terbukti dalam aplikasi paling sulit, dengan biaya kepemilikan berkelanjutan yang rendah.

TAUTAN CEPAT

Hubungi Kami

LOWEST POSSIBLE PROFILE

SAVE ON SPACE BY INCORPORATION OF INCLINE SECTION

BELT WIDTHS UP TO 4m

KOMPONEN STANDAR INDUSTRI TERBUKTI

Features of the LPF

ProEdge
Hot vulcanised belt edge

Incline angles up to 25°

Belt widths up to 4m

Cross slats support the belt

Various drive styles

Conventional belt cleaners are used

Belt protection bars for sharp or lumpy materials

Berco heavy duty undercarriage chain, D3 – D9

Incline angles up to 25°

Belt protection bars for sharp or lumpy materials

ProEdge – Hot vulcanised belt edge

Berco heavy duty undercarriage chain, D3 – D9

Belt widths up to 4m

Conventional belt cleaners are used

Cross slats support the belt

Various drive styles

LPF Applications

Stockpile Reclaim

Ideal for use in the restricted space beneath stockpile, minimising civil costs. The LPF acts as a feeder and transfer conveyor in one.

Front End Loader

Mounted on a simple pad, ideal for material recovery via wheel loader.

Side-Tip Truck Receival

The side-tip truck application is perfectly suited for use by road-trains, making receival incredibly efficient. Multiple hoppers can be employed on a single machine.

Rear Tipping Truck Receival

Surface mounted for rear tipping trucks. Combined receival, storage and feeding. With or without weather enclosure.

Train Loading & Unloading

With it’s ultra-low profile, the LPF sits beneath rail lines and car dumpers at receival facilities in the port or processing plant.

Dozer Trap

Similar to stockpile reclaim applications, the LPF can also be configured as a dozer trap for simple stockpile management and easily relocated.

Ore Bins & Screen Feeding

With a number of widths and load capacities available, the LPF is perfectly suited to sit beneath high capacity ore bins and silos.

Filter Press Discharge

Due to its low profile, the LPF can sit directly beneath filter presses to receive filter cakes and feed toward downstream plant equipment or vehicle receival.

At the Crushing Station

With a number of widths and load capacities available, the LPF is perfectly suited to sit either above or below sizers and crushers.

Pengalaman Kami

D9 LPFs – Epitome of feeders

PILBARA, AUSTRALIA BARAT

Watch the video

Swan Neck LPFs

PILBARA, AUSTRALIA BARAT

Baca studi kasusnya

Widest on the Market LPFs

NEWMAN, WESTERN AUSTRALIA

Baca studi kasusnya

Need a hand finding the right Low Profile Feeder for your needs?

Apakah Anda memiliki pertanyaan mengenai produk atau layanan kami? Silakan hubungi Transmin hari ini juga.

Hubungi kami

Pertanyaan yang Sering Diajukan

What allows the LPF to be lower profile than conventional feeders?

Compared to an apron feeder the chains are outboard of the cross slats, rather than underneath, which means the belt line is lower than apron feeder pans and runs on the PCD of the drive sprocket. Belt feeders typically have belts operating under high tension, necessitating the use of very heavy belts and large diameter drive pullies. With the LPF all tensions are taken through the chains and slats which means the drive sprockets can be considerably smaller in diameter.

Since the belt is bolted to the cross slats, do you see issues with the belt ripping off?

Transmin doesn’t experience the belt ripping off the slats. The reason is two-fold. The first is the fact that the belt is not under tension (the chains carry the tension). The second is due to ongoing product development, which resulted in our patented belt bolts that have a large diameter, bugle head giving a wide contact point with the belt.

How is the incline transition possible?

Unlike a belt feeder, the chains carry all of the tension in the system, so can be guided around rollers. The belt simply supports the material and provides a seal. Conventional apron feeders cannot be transitioned around rollers due to difficulties with conventional pans jamming as they close up. The LPF uses a special design of transition bend rollers which guides the chains around the bend into the inclined section.

What are the maintenance tasks, cost and regular schedule?

We have an example maintenance schedule that we can send upon request. Maintenance time is required at six-monthly and annually intervals to carry out major tasks. At six-months, we expect these tasks to take 24-48 hours, on average. Annually, we expect these tasks to take 72 hours, on average. Costs are usually determined on a case-by-case basis. This is due to wear rates on equipment varying for each application based on duty and material being fed/conveyed. Major components that require attention are wear liners, belt, head sprockets and chain.

Jajaran Produk Kami

Temukan rangkaian produk kami yang luas dan temukan peralatan yang sesuai dengan kebutuhan Anda.

Jelajahi Rentang