INLINE TRANSITION IDLERS

As part of our ConveyorPro range, Transmin supplies a wide range of idler assemblies to suit most conveyor applications – engineered according to the highest industry standards . 1,2,3,4 or 5-Roll idler frame designs are available to suit client specifications.

 

 

ConveyorPro Inline Transition Idler Assemblies are available in 3 or 5 roll configurations to suit required belt width, trough angle and roller spacing. Frames/brackets are made from high quality corrosion resistant steel, with a range of finishes available.

 

Transition idlers are found at either end of the conveyor, adjacent to the head and tail pulleys. These idler sets comprise standard idler rolls however the bases into which these rolls are fitted, have a smaller troughing angle to that of the rest of the troughing / carry idlers on the conveyor.

 

The reason for this is that the conveyor belt is flat as it passes over the pulleys, under high tension. As the belt changes its form to a full trough of say, 35 degrees (i.e. from tail pulley to full trough angle), the belt must be supported through this transition zone. If the belt was fed directly into a full trough from the tail pulley, the belt edges would be over-stressed and damage would result. Similarly, as the troughed angle changes to zero at the head- end, transition idlers provide support through the transition zone. The number of transition idlers required depends on the trough angle of the conveyor. Standard roller types are available as part of the ConveyorPro Roller range (click here).

 

To send us your exact idler specifications, hover over the Technical Specs button below to reveal our idler frames Enquiry Form, which can be filled out and emailed directly to us.

 

 

Why ConveyorPro?

As a trusted name in the Australian mining sector for over 30 years, Transmin engineering stands behind the quality and reliability of the ConveyorPro Range. The range has been designed and compiled with quality, flexibility, fast availability and cost-effectiveness in mind. Our dedicated Parts, Servicing and Engineering departments are on-hand with technical support around the clock, including on site assistance.

 

Contact Transmin for more information.

 

Categories: ,
  • logo

    INLINE TRANSITION IDLERS » EMAIL US

    Please fill in the form below and a relevant Transmin representative will be in contact with you as soon as possible.